Products

Drills


Drill  |  HF2

Two-flute 25° RHS/RHC design for wide application range and moderate depth to diameter ratios featuring SmoothGrind® finishes, SmoothContricity® tolerances and premium Ultra-Grain® carbide substrate.


Drill  |  FD2

Two-flute 30° RHS/RHC Flat-Bottom Boring design for tight tolerance holes featuring double-margins with robust end cut that can remove embedded drill points. SmoothGrind® finishes, SmoothContricity® tolerances and premium Ultra-Grain® carbide substrate.


Drill  |  HP3

Three-flute 30° RHS/RHC High Feed self centering point design for volume production in non-ferrous alloys & plastics, SmoothGrind® finishes, SmoothContricity® tolerances and premium Ultra-Grain® carbide substrate.


Drill  |  HF3

Three-flute 30° RHS/RHC high-performance design for superb hole tolerance and surface finish in steels up to 45HRc. Featuring SmoothGrind® finishes, SmoothContricity® tolerances and premium Ultra-Grain® carbide substrate.


Drill  |  SF2

Two-flute 0° RHC design for modest depth to diameter ratios in hardened materials featuring SmoothGrind® finishes, SmoothContricity® tolerances and premium Ultra-Grain® carbide substrate.


Drill  |  SH2

Two-flute 15° RHS/RHC for moderate depth to diameter ratios in hardened materials featuring SmoothGrind® finishes, SmoothContricity® tolerances and premium Ultra-Grain® carbide substrate.


Drill  |  SD2

Two-flute 25° RHS/RHC spotting design to drill true starting holes featuring SmoothGrind® finishes, SmoothContricity® tolerances & premium Ultra-Grain® carbide. Use a larger drill point angle than the production drill point.


Drill  |  SP2

Two-flute spade flat design for shallow hole drilling in thin sheet materials featuring SmoothGrind® finishes, SmoothContricity® tolerances and premium Ultra-Grain® carbide substrate.


Drill  |  PB2

Two-flute 33° RHS/RHC parabolic design ideal for deep hole drilling in a wide application range of materials featuring SmoothGrind® finishes, SmoothContricity® tolerances and premium Ultra-Grain® carbide substrate.


Towers of Tungsten ToolWorks, Ultra-Tool, Mil-Tec, and RoundTool Laboratories cutting tools cooling down after completion of a SmoothCoat® TA coating batch.


Tungsten ToolWorks is a manufacturer of customized (special) solid carbide cutting tools, sold worldwide under the Tungsten ToolWorks brand name. Products include solid carbide end mills, drills, reamers, burrs, micro tools, sub-miniature tools, micro tools, engraving tools, boring tools, keyseat cutters, burrs, slitting saws, carbide cylinders, countersinks, routers, radius mills, CBN tools, compression tools, and more. Technologies include SmoothCoat PVD hard coatings, SmoothGrind polished cutting edges, SmoothEdge prep and hone, and SmoothContricity shrink fit ready shanks. Coatings include D2 CVD diamond, D1 PVD amorphous diamond, TA TiAlN, AT AlTiN, TN TiN, TC TiCN, and A1 TiB2. Industries using our products include aerospace, semiconductor, die & mold, micro (nano) machining, woodworking, medical, consumer electronics, automotive and more. Workpiece materials to be drilled, milled, reamed, routed, engraved and more include titanium (6Al-4V, 5553), stainless (303, 304, 316, 410, 420, 440C, 15-5, 17-4, 13-8, 316L), tool steels (A2, D2, H13), general steels (1018, 1020, 4140, 4340, P20), Inconel (625, 718), cast iron, non-ferrous materials including aluminum, copper, brass, bronze, wood & plastics, CFRP (carbon fiber reinforced plastic), graphite, composites, fiberglass, and more. Tungsten ToolWorks is a Tool Alliance company.